Wolf Range Przewodnik Instalacji Pobierz pdf (Strona 16)

Gas Range Installation 16

OVEN DOOR REINSTALLATION

1) Hold the oven door on both sides and position it with

door hinges aligned with openings in the oven frame.

2) Holding the oven door at an approximate 30° angle

from vertical, slide the hinges into the openings

until the bottom hinge arms drop fully into the hinge

receptacles.

3) Open the oven door to its fully opened position.

Remove the hinge pin from the appropriate hinge arm.

4) Reinstall the hinge retainer plate with upper and lower

mounting screws.

5) Open and close the door completely to ensure that it is

properly installed.

6) Reinstall the lower kickplate assembly.

Oven Door Removal

OVEN DOOR REMOVAL

1) Remove the lower kickplate assembly.

2) Open the oven door all the way and insert the door

hinge pin through the hole in the appropriate hinge

arm. Refer to the illustration below.

3) Remove both upper and lower hinge retainer mounting

screws. The oven gasket may have to be moved

slightly to access the bottom screws.

4) Move the hinge retainer plate forward slightly. The

hinge retainer plate will remain on the door hinge after

the mounting screws have been removed.

5) Carefully close the oven door to approximately 60°

from horizontal and lift the door away from the oven.

A slight racking motion may be required for removal.

KICKPLATE

UPPER

MOUNTING

SCREW

HINGE

RETAINER

PLATE

HINGE

Oven door removal.

Do not lift or carry the oven door by the door handle.

1 2 ... 11 12 13 14 15 16 17 18 19 20

Brak uwag

Wolf Range Przewodnik Instalacji Strona 16