Wolf DCL-200 FD Dokumentacja Pobierz pdf (Strona 19)

DCL-200 FD1080p DLP LED Front Projector User’s Manual

Setting up the Screen

Position the projector perpendicular to the screen with all feet flat and level to achieve an optimal image.

Note: • The projector lens should be centered in the middle of the screen. If the horizontal line passing through the lens center

is not perpendicular to the screen, the image will be distorted, making viewing difficult.

• For an optimal image, position the screen so that it is not in direct sunlight or room light. Light falling directly on the

screen washes out the colors, making viewing difficult. Close the curtains and dim the lights when setting up the

screen in a sunny or bright room.

• A polarizing screen cannot be used with this projector.

Note: 2D Lens Shift Ability:

• Short throw lens shift:

1/2 of screen height: Up 120%, Down 50%

1/2 of screen height: Left 15%, Right 15%

• Long throw lens shift:

1/2 of screen height: Up 120%, Down 50%

1/2 of screen height: Left 15%, Right 15%

• It is recommended that images be

projected onto the dashed line octagonal

area for fine image quality.

• There is a tolerance of ±5% in the

formula above.

Standard Setup (Front Projection)

Place the projector at the required distance from the screen according to the desired picture size.

An Example of Standard Setup

• The distance from the screen to the projector may

vary depending on the size of the screen.

• Set the projector in front of the screen. If the

projected image is reversed or inverted, readjust

the setting to Front for Image Orientation in

the Display Setup menu.

• Place the projector so that an imaginary horizontal

line that passes through the center of the lens is

perpendicular to the screen.

Audience

4040

2323

HHH

VVV

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 48 49

Brak uwag

Wolf DCL-200 FD Dokumentacja Strona 19